98 Sebring Power Door Locks

1998 CHRYSLER SEBRING
100 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
ONECHECK
  • MEMBER
  • 1 POST
I have a 98 Chrysler Sebring 2 door LXI coupe non convertible without keyless entry. My door locks on both drivers and passenger inside locks will not stay locked when the door lock switch is pressed (it locks and the opens). I can open and close the doors when using the key in the outside door locks on both sides. I'm expecting high resistance in the inside door lock switches. After looking through All data I was not able to find a diagram on the pins to test the switch (there are about 9 to 10 pins). Does anybody have Shop Key or know what pins to test? If so can you upload the diagram for me?

Thanks
Aug 4, 2011 at 1:02 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
JACOBANDNICKOLAS
  • CAR REPAIR CONTRIBUTOR
  • 110,190 POSTS
Here is a wiring schematic of the BCM and the junction block that powers the locks. I hope it helps.

Sorry it took so long to get back with you. We changed our website in Aug and all sorts of crazy things happened.

Let me know if I can help you further.
Image (Click to enlarge)
Attached Media
Oct 8, 2011 at 1:49 AM
Advertisement