Truck is on courser mt 30x9.5x15 ith the tortion bars cranked up all the way so the tires dont rub, the truck has 0 inches of lift.I replaced all the inners, outers, ball joints and cv axles, trucks wheels look like / \. I see that there are cam bolts in the uppers, none in lowers, truck is on a jack but just enough to take off pressure, gonna use a framing square to get it close, my question is, does the bolt spin or the nut? They both have the cam wheels and i dont want to just go all gung ho and snap anything.Truck is eating up new and the new idler arm(didnt rotate the tires when i changed the parts,the front tires were cupped).I tried to adjust the drivers side rear most cam bolt, and the bolt and nut both slightly turned. I dont ant to make this worse,how high should i jack it up?
Oct 7, 2011 at 11:20 PM
