Saturday, May 14th, 2011 AT 5:37 PM
SEF49
- MEMBER
- 1998 CHEVROLET LUMINA
How do I remove he dome light cover to replace the bulb.
Dome light
1 Reply
KEN L
- MASTER CERTIFIED MECHANIC
- 47,513 POSTS
Hello,
It will take a small standard (flat blade) screwdriver to release the tabs on the side of the dome light lens cover.
REMOVE OR DISCONNECT
Lens by unsnapping from dome lamp.
Bulb from socket.
INSTALL OR CONNECT
Bulb to socket.
Lens by snapping onto dome lamp.
Here are diagrams that can help (below)
Please let us know if you need anything else to get the problem fixed.
Cheers, Ken
It will take a small standard (flat blade) screwdriver to release the tabs on the side of the dome light lens cover.
REMOVE OR DISCONNECT
Lens by unsnapping from dome lamp.
Bulb from socket.
INSTALL OR CONNECT
Bulb to socket.
Lens by snapping onto dome lamp.
Here are diagrams that can help (below)
Please let us know if you need anything else to get the problem fixed.
Cheers, Ken
Image (Click to make bigger)
SPONSORED LINKS
Was this helpful?
Yes
No
Thursday, February 8th, 2018 AT 5:33 PM
