Gear Change

1998 CHEVROLET CAVALIER
158,000 MILES • AUTOMATIC
Avatar
AEDWARD79
  • MEMBER
  • 2 POSTS
Have a 1998 chevrolet cavalier and recently it won't change gear, it seem that the stick is loose, it will not catch at all. Got in car cranked up and it went to neutral and wouldn' catch to any other gears. I'm hoping a transmission is not needed. :(
Jan 1, 2011 at 10:25 PM
Advertisement
Avatar
DAVE H
  • ASE Certified Mechanic
  • 13,384 POSTS
  • ASE Certified Mechanic
start by checking the control linkage
Jan 2, 2011 at 3:03 PM
Avatar
AEDWARD79
  • MEMBER
  • 2 POSTS
Where and what exactly is the control linkage?
Jan 2, 2011 at 3:57 PM
Avatar
DAVE H
  • ASE Certified Mechanic
  • 13,384 POSTS
  • ASE Certified Mechanic
Neutral safety switches come in 2 different types. See Fig. 16. Ensure shift cable is adjusted. To adjust switch, place gear selector lever in Neutral.
Place transaxle lever in Neutral detent. Loosen switch attaching screws. Rotate switch on shifter assembly to align adjustment hole with carrier tang hole.
Insert a .094" (2.4 mm) wire gauge about 5/8" (16 mm) into switch holes. Tighten attaching screws. Remove wire gauge. New switches may have a plastic pin installed in hole. Plastic pin is designed to shear off during initial shift lever operation.
Fig. 16: Adjusting Park Neutral Position (PNP) Switches (FWD)
Jan 5, 2011 at 9:56 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.