no start

If the vehicle does not do anything when you try to start it then we need to go to the starter and find out if we even have power. Basically, we need to see if you have 12 volts on both wires when cranking the engine.

Here is a video that will help with getting us started:

https://youtu.be/dCjmRL3p4Cs

I am attaching the wiring diagram below but if you have no voltage going to the starter then we need to go to the relay and jump both relays to find out if we have power at the terminals on the tops of the relays shown below.

Here is a guide that will help with checking the relays as well:

https://www.2carpros.com/articles/how-to-check-an-electrical-relay-and-wiring-control-circuit

Please see the info attached and let us know what you find with each of these and then we can go from there.

Thanks