1998 Buick Park Avenue Replace Fuel Guage Sending Unit

1998 BUICK PARK AVENUE
90,000 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
how do i replace the fuel guage sending unit
Jan 30, 2013 at 12:44 AM
Advertisement
Avatar
SATURNTECH9
  • ✓ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
There is a access panel in your trunk you remove the spare and the jack and liner then you will see a access panel on the floor of the trunk.Make sure you have 3/4 of a tank of gas or less.Make sure you releave the fuel pressure before unhooking the fuel and vapor lines.You unplug it they have a tool to remove the lock ring so the pump will come out.Watch the float arm when removing and installing it.
Jan 30, 2013 at 12:59 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.