1997 Toyota Tarago Squeak, rattle

2.4L • 4 CYL • RWD • AUTOMATIC
Avatar
PJR
  • MEMBER
  • 1 POST
When headlights are turned on low beam, a squeak sound occurs, seems to be coming from nearby main drive belt. Same squeak sound occurs if other electrics activated (electric windows, rear demister etc). When headlights are changed from low to high beam, sound changes from squeak to rattle, couldn't detect source of rattle noise.

Would be appreciated if you could assist with diagnosis of problem.
Jun 19, 2015 at 1:47 PM
Advertisement
Avatar
CARADIODOC
  • ✓Experienced Mechanic
  • 34,413 POSTS
I assume this is happening while the vehicle is standing still. If so, sprinkle a little water on the smooth backside of the serpentine belt while the noise is occurring. If the noise changes, the tensioner pulley isn't holding enough tension on the belt, or one of the pulleys is tipped or turned. A tipped pulley is usually caused by a worn bearing, most commonly on one of the idler pulleys, and will cause the belt to slide across that pulley or the one right after it, as it goes around it.
Jun 19, 2015 at 2:48 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle