97 4runner knock sensors

1997 TOYOTA 4RUNNER
18,700 MILES • 6 CYL • 4WD • AUTOMATIC
Avatar
G6SPOT9
  • MEMBER
  • 2 POSTS
is there a way to know which knock sensors I have in my 97 4runner SR5 V6 4wd? Seems they used 2 different ones and in order to change them I need to know which ones are in the truck. I don't really want to take it apart until I get the parts.
Dec 19, 2010 at 7:34 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
DOCFIXIT
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 18,828 POSTS
Could be either a Denso or Matsu****a type and no way to tell until removed Denso most common. What code was shown? intend to replace both?
Dec 19, 2010 at 7:56 PM
Advertisement
Avatar
G6SPOT9
  • MEMBER
  • 2 POSTS
Both codes came up so I intend on changing both. I found them cheap on ebay, 49.99 ea. or 74.99 each. So I guess I have to remove the old ones first then order them. What a pain! I actually had a dealer from toyota try to sell me one of each. Telling me thats what the truck required. I found that to be odd so I did a bunch of research and found out it's one type or the other. Was there a manufacturing cut off date when they changed from one to the other?
Dec 20, 2010 at 12:36 AM
Avatar
DOCFIXIT
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 18,828 POSTS
Been out of town don't know about date TOy does not provide. what is status?
Dec 24, 2010 at 5:13 PM