I have changed plugs wires one coil and the module, but it continues to skip under load ! On hills mianly
Friday, August 8th, 2014 AT 10:44 AM
3 Replies
HMAC300
MECHANIC
48,601 POSTS
Scan for codes and check fuel pressure with a gauge auto parts rent it
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, August 8th, 2014 AT 12:45 PM
STEVE MATUSXEWSKI
MEMBER
2 POSTS
I have checked for codes ! Sais mis fire, no other codes found, if preasure aint right would it skip? And why would it run sweet one minute and the next it goes to skipping? Fuel filter pluged?
Was this
answer
helpful?
Yes
No
Friday, August 8th, 2014 AT 1:18 PM
HMAC300
MECHANIC
48,601 POSTS
Misfires are very hard to diagnose and shold be left for the pros as it's not easy for them as well. Check for a vacuum leak and check compression. It may be a sensor going bad that is not sending correct voltage causing it.