how to replace belts on 97 plymouth grand voyager se 3.0 litre
Apr 21, 2011 at 7:24 PM
belt replacement
1997 PLYMOUTH
GREMLINBOB
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
The air conditioning belt has a tensioner bolt in front of the compressor that must be loosened about ten to fifteen turns, then the nut in the center of the pulley is loosened to let it slide down.
Once the AC belt is off, there is a spring-loaded tensioner pulley for the serpentine belt. Hook a 15mm box wrench on its center nut and pull it forward to release the tension.
Once the AC belt is off, there is a spring-loaded tensioner pulley for the serpentine belt. Hook a 15mm box wrench on its center nut and pull it forward to release the tension.
Apr 21, 2011 at 8:03 PM
Advertisement