engine coolsnt leak and it has a collection on top of engine on the out side
Jan 21, 2011 at 12:51 AM
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
FIXITMR
AUTOMOTIVE REPAIR CONTRIBUTOR
9,990 POSTS
you could mention what exact engine you have. it's usually on a sticker under hood or on vavle cover.
Jan 21, 2011 at 1:28 AM
Advertisement
JUSTIN STRUCK
MEMBER
6 POSTS
2.4l
Jan 21, 2011 at 2:20 AM
FIXITMR
AUTOMOTIVE REPAIR CONTRIBUTOR
9,990 POSTS
this puppy here i guess!
Image (Click to enlarge)
Jan 21, 2011 at 3:47 AM
FIXITMR
AUTOMOTIVE REPAIR CONTRIBUTOR
9,990 POSTS
so where exactly is it collecting at? car is not running hot is it?
Jan 21, 2011 at 3:55 AM
JUSTIN STRUCK
MEMBER
6 POSTS
it is coleting right beside the oil fill and the rest drips onto the ground
Jan 21, 2011 at 4:01 AM
FIXITMR
AUTOMOTIVE REPAIR CONTRIBUTOR
9,990 POSTS
it could be the water pump? which is inside the timing cover next to the oil cap on left. or maybe the radiator cap which is also nearby? i'm leaning to water pump though. also could be a freaky hose leak that squirts to that area?
Jan 21, 2011 at 5:13 AM
JUSTIN STRUCK
MEMBER
6 POSTS
is there a easy way of telling where it is coming from? could it bee the plastic tube with the o ring in it that is causing the leak?
Jan 22, 2011 at 12:07 AM
FIXITMR
AUTOMOTIVE REPAIR CONTRIBUTOR
9,990 POSTS
what? where? you have to be more specific or just take some pics and upload. you could clean off area and with hood open run engine until you spot it?
Jan 22, 2011 at 3:00 AM
JUSTIN STRUCK
MEMBER
6 POSTS
is it possible to find a metal thermostat housing? cause mine is warpped
Jan 23, 2011 at 5:29 AM
FIXITMR
AUTOMOTIVE REPAIR CONTRIBUTOR
9,990 POSTS
so yours is plastic? try shaving it flat again. i even have to do it with metal 1's! i use sandpaper on a flat surface. i've even used a chop saw by holding against flat side of grinding wheel/blade. macgyver style.