how to replace a motor blower in a 1997 oldsmobile eighty eight
Jan 5, 2011 at 1:42 AM
How to replace a motor blower?
1997 OLDSMOBILE 88
JEANNE5172
- MEMBER
- 1 POST
Advertisement
SATURNTECH9
- ✓ASE Certified Mechanic
- 30,869 POSTS
The blower is located at the right side of the HVAC blower module near the right of the vehicle.
Remove or Disconnect
1. Nuts and cross brace bar.
2. Electrical connector from blower motor.
3. Cooling tube from blower motor.
4. Screws attaching blower motor to blower module assembly.
5. Blower motor.
Install or Connect
1. Blower motor.
2. Blower motor attaching screws.
Tighten
* Screws to 6 N.m (5 lb. in.).
3. Cooling tube to blower motor.
4. Electrical connector to blower motor.
5. Cross brace bar and nuts.
Tighten
* Nuts to 25 N.m (18 lb. ft.).
Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Remove or Disconnect
1. Nuts and cross brace bar.
2. Electrical connector from blower motor.
3. Cooling tube from blower motor.
4. Screws attaching blower motor to blower module assembly.
5. Blower motor.
Install or Connect
1. Blower motor.
2. Blower motor attaching screws.
Tighten
* Screws to 6 N.m (5 lb. in.).
3. Cooling tube to blower motor.
4. Electrical connector to blower motor.
5. Cross brace bar and nuts.
Tighten
* Nuts to 25 N.m (18 lb. ft.).
Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Jan 5, 2011 at 2:04 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.