SPONSORED LINKS

1997 Mazda B2300 crank no fire

Tiny
FORDGIRL2300
  • MEMBER
  • 1997 MAZDA B2300
  • 2.3L
  • 4 CYL
  • RWD
  • MANUAL
  • 160,000 MILES
I was driving down the road when my engine stopped I had my foot on the gas it just didn't do anything now it will crank but not fire. It is a 1997 Mazda b2300pick-up truck. I have checked there is spark but a little weak, there is fuel at the fuel rail and my pump is working. I replaced the alternator thing that was the problem but no luck, put new plugs and wires in it this year, and the timing chain was replaced once on it. Is there any solutions to this problem that you might know of diagnostic tips?
SPONSORED LINKS
Monday, September 22nd, 2014 AT 5:19 PM

3 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
Simple test. See if the engine will start for a couple seconds with starting fluid. Let me know what you find.
Was this
answer
helpful?
Yes
No
-1
Monday, September 22nd, 2014 AT 5:31 PM
Tiny
FORDGIRL2300
  • MEMBER
  • 2 POSTS
Already tryed it will not start with starting fluid down the throttle body
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, September 22nd, 2014 AT 6:10 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
If it won't start with starting fluid, then you are not getting spark. Check that and if I'm correct, check the crank sensor. Also, let me know if the check engine light was on.
Was this
answer
helpful?
Yes
No
Monday, September 22nd, 2014 AT 7:18 PM

Please login or register to post a reply.

Related Engine Not Cranking Over Content

Starter Not Working
GUIDE
Starter Not Working
This guide is designed to help you identify whether the issue with your non-working starter motor is due to an electrical problem or a fault within the starter motor itself...
VIEW MORE

Sponsored links