How do i replace the tps on a 97 lincoln continental 4.6l. There were 4 or 5 codes all relating to the tps, don't remember the p numbers.
Mar 12, 2011 at 8:37 PM
throttle position sensor
1997 LINCOLN CONTINENTAL
STAYLOR52
- MEMBER
- 3 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
REMOVAL
Remove throttle body.
Remove two Throttle Position (TP) sensor retaining screws from throttle body.
Remove TP sensor.
INSTALLATION
Follow removal procedure in reverse order.
Tighten retaining screws to 2.4-3.8 Nm (22-33 lb in).
Cycle throttle lever to wide open throttle. It should return without interference.
Remove throttle body.
Remove two Throttle Position (TP) sensor retaining screws from throttle body.
Remove TP sensor.
INSTALLATION
Follow removal procedure in reverse order.
Tighten retaining screws to 2.4-3.8 Nm (22-33 lb in).
Cycle throttle lever to wide open throttle. It should return without interference.
Image (Click to enlarge)
Mar 12, 2011 at 8:43 PM
Advertisement
thanks, so there is nothing to adjust? just plug & play.
Mar 12, 2011 at 8:48 PM