Electrical Connector Plug - MIA

1997 JEEP GRAND CHEROKEE
190,000 MILES • 6 CYL • 4WD • AUTOMATIC
Avatar
MILLETTE1
  • MEMBER
  • 5 POSTS
97 Jeep Grand Cherokee - I need a plug that goes into the blower motor resistor from the engine compartment (old one partially melted). Can't find a junk old enough (5 different junk yards and on line) and Jeep has blown me off - said it's not listed separately and getting the whole harness for a car that old isn't possible (2 different dealers - same answer). Where can I find it or have it fabricated? Thanks.
Dec 8, 2010 at 2:30 PM
Advertisement
Avatar
BUDDYCRAIGG
  • Experienced Mechanic
  • 2,262 POSTS
I need to know if you have automatic temp control.
Dec 8, 2010 at 2:45 PM
Avatar
MILLETTE1
  • MEMBER
  • 5 POSTS
Yes I do have automatic temp control.
Dec 8, 2010 at 3:07 PM
Avatar
BUDDYCRAIGG
  • Experienced Mechanic
  • 2,262 POSTS
which plug are you needing?
Dec 8, 2010 at 9:02 PM
Avatar
MILLETTE1
  • MEMBER
  • 5 POSTS
I need exactly the plug that fits into the socket you are showing in the picture.
Dec 9, 2010 at 6:18 AM
Avatar
BUDDYCRAIGG
  • Experienced Mechanic
  • 2,262 POSTS
the white socket or the black socket?
Dec 9, 2010 at 8:02 AM
Avatar
MILLETTE1
  • MEMBER
  • 5 POSTS
The black socket with 3 metal prongs sticking up inside.
Dec 9, 2010 at 9:17 AM
Avatar
BUDDYCRAIGG
  • Experienced Mechanic
  • 2,262 POSTS
I found them for 91-96 and 99-04. But nothing on 97-98. you may have to just push the connectors on individually. I would put shrink tubing on each one so they cant touch eachother.
Good luck.
Dec 9, 2010 at 11:09 AM
Avatar
MILLETTE1
  • MEMBER
  • 5 POSTS
Thanks.
Dec 9, 2010 at 11:24 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.