1997 Jeep Cherokee transmission problem

1997 JEEP CHEROKEE
201,000 MILES • 4.0L • 6 CYL • 4WD • AUTOMATIC
Avatar
EDFISHER
  • MEMBER
  • 14 POSTS
my jeep drives fine for about 10 miles after starting from cold. then the check engine comes on and it starts
shifting badly. my scanner reads po700 which is a general transmission malfunction code. i'll start up the
car the next day and the check engine light will be off until I drive about another 10 miles. then I get the same
symptoms. I have a small leak but I keep it topped off. it has been a long time since the fluid has been changed and it's brown in color. any help would be greatly appreciated. thank you.

Jul 18, 2015 at 8:20 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
CARADIODOC
  • CAR REPAIR CONTRIBUTOR
  • 34,308 POSTS
Code 700 means there's a code in the Transmission Computer. The place to start is by having those codes read. You will probably have to visit a mechanic for that. Most of the code readers used by the people at auto parts stores will only read codes in the Engine Computer, but you'll have yo ask.
Jul 18, 2015 at 7:34 PM
Advertisement
Avatar
EDFISHER
  • MEMBER
  • 14 POSTS
thank you.
Jul 19, 2015 at 6:59 AM