How do we replace a knock sensor on 1997 XJ6 Jaguar? Where is it located

LWILTON

MEMBER
1997 JAGUAR XJ6
73,000 MILES

How to replace knock sensor 1997 xj6 jaguar

Monday, September 19th, 2011 AT 11:04 PM

1 Reply

HMAC300

MECHANIC
48,601 POSTS

They are on the left front and left rear of engine block. They should just screw in and out after you disconnect the connector. However they may be into the coolant jacket and it may need to drain some coolant from the engine.

Please login or register to post a reply.

Related Knock Sensor Replace/Remove Content

1997 Jaguar Xj6 Engine Rattle - Timing Chain Or...

I Have A Rattle Coming From The Engine Bay Only Appears Once The Engine Is Warmed Up And Is Worse At About 2000 Rpm. My Mechanic Has...

Asked by pby ·

1 ANSWER

1997

JAGUAR XJ6

1997 Jaguar Xj6 Replacing Engine

The Engine Is Ready To Take Out Of The Car Except For The Three Bolts On The Top And Side Of The Transmission Bell Housing. There Is A Heat...

Asked by flightcommander ·

1 ANSWER

1997

JAGUAR XJ6

1996 Jaguar Xj6 Engine Rebuilt Or Replacements...

I Got Tht Jaguar And They Diagnose One Piston At 58% While The Other Ones Were Above 130. I Was Told To Run It Until It Died But Is My Wife...

Asked by apadrofret ·

1 ANSWER

1996

JAGUAR XJ6

Crank Shaft Pulley Damper

Do U Repair The Damper Rubber As I Could Find A Replacement. I Can Email U The Photo

Asked by huisc ·

3 ANSWERS

1 IMAGE

1971

JAGUAR XJ6

1987 Jaguar Xj6 Replacing Engine

Engine Mechanical Problem 1987 Jaguar Xj6 6 Cyl Two Wheel Drive Automatic The Motor In My Xj6 Has Been A Persistant Ploblem Is Now...

Asked by lakeside ·

1 ANSWER

1987

JAGUAR XJ6

Sponsored links

Ask a Car Question. It's Free!