HOW TO REPLACE ONE ONLY ROCKER ARM WITHOUT REMOVING CAM SHAFT IN TWIN CAM
Mar 8, 2013 at 2:20 PM
1997 Hyundai Sonata Replace One Only Rocker Arm Without Removing Cam Shaft Twin
1997 HYUNDAI SONATA
ANONYMOUS
- MEMBER
- 1 POST
Advertisement
HMAC300
- ✓ASE Certified Mechanic
- 48,601 POSTS
Removal
1. Disconnect throttle cable bracket from intake plenum. Remove timing belt. See TIMING BELT. Remove valve cover. R
See Fig. 9.
2. Secure exhaust camshaft at hexagonal area using wrench, and remove sprocket bolt and sprocket. Repeat procedure for i
front camshaft bearing cap bolts in 3 steps. Remove caps and seals.
3. Repeat procedure for remaining camshaft bearing cap bolts. Remove rear bearing caps last. Remove remaining camshaft
and exhaust camshafts. Remove rocker arms and lash adjusters from cylinder head.
if the rocker arm is damaged then the cam will be also and replaceing one will do absolutely no good.
1. Disconnect throttle cable bracket from intake plenum. Remove timing belt. See TIMING BELT. Remove valve cover. R
See Fig. 9.
2. Secure exhaust camshaft at hexagonal area using wrench, and remove sprocket bolt and sprocket. Repeat procedure for i
front camshaft bearing cap bolts in 3 steps. Remove caps and seals.
3. Repeat procedure for remaining camshaft bearing cap bolts. Remove rear bearing caps last. Remove remaining camshaft
and exhaust camshafts. Remove rocker arms and lash adjusters from cylinder head.
if the rocker arm is damaged then the cam will be also and replaceing one will do absolutely no good.
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Mar 8, 2013 at 3:19 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.