do I need to remove the front wheel hubs to change the brake discs on my 1997 Lantra Siena?
Aug 4, 2011 at 11:09 AM
Lantra Front Discs
1997 HYUNDAI LANTRA
WHEELSUP
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
FRONT DISC BRAKE ROTOR
Removal
Raise and support vehicle. Remove front wheel. Remove caliper assembly torque plate-to-steering knuckle bolts. Remove caliper assembly and wire aside.
Remove axle shaft hub nut. Using Rotor Puller (09526-11001), press axle shaft out of hub. Remove rotor and hub. See Fig. 5 . Check rotor specifications. See DISC BRAKE SPECIFICATIONS tables.
Removal
Raise and support vehicle. Remove front wheel. Remove caliper assembly torque plate-to-steering knuckle bolts. Remove caliper assembly and wire aside.
Remove axle shaft hub nut. Using Rotor Puller (09526-11001), press axle shaft out of hub. Remove rotor and hub. See Fig. 5 . Check rotor specifications. See DISC BRAKE SPECIFICATIONS tables.
Image (Click to enlarge)
Aug 4, 2011 at 11:19 AM
Advertisement