Lantra Front Discs

Tiny
WHEELSUP
  • MEMBER
  • 1997 HYUNDAI LANTRA
  • 4 CYL
  • 2WD
  • MANUAL
  • 164 MILES
Do I need to remove the front wheel hubs to change the brake discs on my 1997 Lantra Siena?
Thursday, August 4th, 2011 AT 11:09 AM

1 Reply

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
FRONT DISC BRAKE ROTOR
Removal
Raise and support vehicle. Remove front wheel. Remove caliper assembly torque plate-to-steering knuckle bolts. Remove caliper assembly and wire aside.
Remove axle shaft hub nut. Using Rotor Puller (09526-11001), press axle shaft out of hub. Remove rotor and hub. See Fig. 5. Check rotor specifications. See DISC BRAKE SPECIFICATIONS tables.
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, August 4th, 2011 AT 11:19 AM

Please login or register to post a reply.

Related Bearing Hub Replace/Remove Content

Wheel Bearing Hub Replacement
VIDEO
Wheel Bearing Hub Replacement
Instructional repair video
Bearing Hub Replacement
GUIDE
Bearing Hub Replacement
A bearing hub is used to allow the wheel to rotate while supporting the weight of the car and is mounted to the front or rear of the suspension system. The hub consists of a...

Sponsored links