SPONSORED LINKS

Blinkers not working?

Tiny
MARTIN143
  • MEMBER
  • 1997 GEO TRACKER
  • 1.6L
  • AUTOMATIC
  • 142,000 MILES
My blinkers do not work and the hazzards do not work, can you tell me what can be the issue? I checked the fuses they are good. Can it possibly be a relay? And if so where is that and what else can be the problem?

Thank you,
Martin
SPONSORED LINKS
Thursday, January 15th, 2015 AT 1:38 PM

9 Replies

Tiny
CATAFINA
  • MECHANIC
  • 167 POSTS
Check your turn and hazard relay behind glove box
Was this
answer
helpful?
Yes
No
+2
Thursday, January 15th, 2015 AT 3:26 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
If he bulbs are ok it may be the multi function switch or flasher which is part of hazard switch for both. Check fuses under hood and in dash as well.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, January 15th, 2015 AT 4:15 PM
Tiny
AUDBAL82
  • MEMBER
  • 4 POSTS
  • 1994 GEO TRACKER
  • 4 CYL
  • 2WD
  • MANUAL
  • 13,200 MILES
I just pruchased the 1994 Geo Tracker with 132,000 miles on it and the turn signals do not work inside or outside and there is no clicking noise made inside either.

The flashers DO work.
Was this
answer
helpful?
Yes
No
Friday, January 22nd, 2021 AT 11:59 AM (Merged)
Tiny
BUDDYCRAIGG
  • MECHANIC
  • 2,262 POSTS
Start by checking the turn signal flasher.
Was this
answer
helpful?
Yes
No
Friday, January 22nd, 2021 AT 11:59 AM (Merged)
Tiny
AUDBAL82
  • MEMBER
  • 4 POSTS
I picked up the flasher, but can't find the insert/place for it. Even had the autopart guy come out and look. OH well. I will have my brother in law look at it tommarrow.

Thanx for you time!
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
-1
Friday, January 22nd, 2021 AT 11:59 AM (Merged)
Tiny
BUDDYCRAIGG
  • MECHANIC
  • 2,262 POSTS
I dont have a picture,
But my book says that the flasher is located under the left side of the dash, next to the ECM computer.

If the flasher doesn't fix the problem.
And you have verified that the hazards work correctly (as in not a ground problem with the bulbs themselves)
and you have checked the 15amp turn signal fuse.
Then the problem would have to be in the turn signal switch.

Double check the fuse for me.
Was this
answer
helpful?
Yes
No
+1
Friday, January 22nd, 2021 AT 12:00 PM (Merged)
Tiny
AUDBAL82
  • MEMBER
  • 4 POSTS
I do have the manual for repairing the car and it says the flasher should be right where u said it is and thats where my brother thinks it should be. But I'm not seeing it. But I'm a bit of a girl about these things. Just learning.

We started out witht he fuse, that didn't fix it. I just hope it's not the switch, thats 200 bucks!

Thank you for replying
Was this
answer
helpful?
Yes
No
+2
Friday, January 22nd, 2021 AT 12:00 PM (Merged)
Tiny
BUDDYCRAIGG
  • MECHANIC
  • 2,262 POSTS
If you are in the same boat as me and have more time than money.

Then you might try spraying the inside of the switch with contact cleaner.
Was this
answer
helpful?
Yes
No
Friday, January 22nd, 2021 AT 12:00 PM (Merged)
Tiny
AUDBAL82
  • MEMBER
  • 4 POSTS
Yes, I do have alot more time than money. I was laid off and lost my Elantra to reposession so with some family help I had enough money to buy this Tracker. Whew.

I haven't been in this boat in a while, but it's nice to have the title to my own car rather than the lien holder! Haha I'd rather have a car stuck in the drive way for a couple weeks than fearing a reposession and killing my credit score. It's either a rock or hard place, isn't it?

I drove it today with the hazrds on just so I couldn't get a ticket for not using a blinker. Plus, it was only my third day driving the manual. So it gave other drivers a lil warning of my possible. MISTAKES. Lame, I know!
Was this
answer
helpful?
Yes
No
Friday, January 22nd, 2021 AT 12:00 PM (Merged)

Please login or register to post a reply.

Related Turn Signal Not Working Content

Turn Signal Problems
GUIDE
Turn Signal Problems
Turn signals are intended to help inform surrounding drivers of the vehicle's intended change in direction. Although there are a few different causes for signal failure...

Sponsored links