1997 Ford Thunderbird After Replacing Cracked Intake Manifold On V8 97 Tbird

1997 FORD THUNDERBIRD
76,000 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
After replacing a cracked intake manifold on a V8 97 Tbird that overheated and stalled the car fails to idle. The engine runs and sounds ok as long as you stay on the throttle, as soon as you let off it stalls. As soon as you start it coolant overflows the degas bottle. We tested and had approx 120 psi on each cylinder. We cranked the engine with only one spark plug in at a time but the coolant level was stable. We then tried adjacent cylinders and with plugs in 3 & 4 the coolant surged out of the degas bottle. We assumed this meant the head gasket was blown between 3 & 4. But with the head removed, the gasket, head and cylinder wall all look fine. Any suggestions?
Oct 21, 2012 at 12:06 AM
Advertisement
Avatar
ASEMASTER6371
  • ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
have the head checked for warpage and cracks. get both heads done the same.

Roy
Oct 21, 2012 at 12:09 AM
Avatar
RASMATAZ
  • ASE Certified Mechanic
  • 75,992 POSTS
  • ASE Certified Mechanic
The head could be warped or cracked-have it checked out-Magnafluxed
Oct 21, 2012 at 12:12 AM
Avatar
RASMATAZ
  • ASE Certified Mechanic
  • 75,992 POSTS
  • ASE Certified Mechanic
Wow! same thought-
Oct 21, 2012 at 12:13 AM
Avatar
ASEMASTER6371
  • ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
yep, we are on the same track, as usual

Roy
Oct 21, 2012 at 12:14 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.