will i Need to replace head gakets and bolts agine

1997 FORD MUSTANG
180 MILES
Avatar
MARVINEVANS
  • MEMBER
  • 9 POSTS
I just redid my head gaskets and wen i started it it is leaking coolent and oil if i take it all back apart agine will i need to get new head gaskets i have only ran the car for 2 min if i just retorque then and spray them with a copper sealent will i need new ones now that they have been torqued also oem headbolts are torque to yeald bolts to i had them replaced will i need to do thia agine
Sep 3, 2012 at 7:13 PM
Advertisement
Avatar
ASEMASTER6371
  • ✓ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
did you get the leak down test done?? you need to find the area before tearing into it again, Yes, all will have to be replaced again. no gasket sealers and new head bolts again.

Roy
Sep 3, 2012 at 7:33 PM
Avatar
MARVINEVANS
  • MEMBER
  • 9 POSTS
How will i beable to tellon the leak down test because it is not leaking into the engine cylnder only between the coolent ports and oil ports and the outside of the engine so coolent systen pressure test willonly force coolent into the oil ?
But if i put it on dry wont it do the exsact same thing agine ??
Sep 3, 2012 at 7:40 PM
Avatar
ASEMASTER6371
  • ✓ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
thats why you need a shop to do it as they use a dye to find the leak.

Roy
Sep 3, 2012 at 8:00 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.