1997 Ford Falcon Heat Gage

1997 FORD FALCON
177,700 MILES • 4.0L • 6 CYL • RWD • MANUAL
Avatar
ROYNAIDOO
  • MEMBER
  • 1 POST
The fan was not working so we connected with the battery. We then decided to change the heat switch with a universal one but the gage in the dash board remains continuously up. Please confirm what must be done.
Jan 15, 2014 at 9:01 PM
Advertisement
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
we have no info on this car as it's not in U.S. but put correct switch in first then if gauge is still on hot check for agrounded wire. aslo check to see if relay underhood and fuse is good one may not be. you can switch relays with a like relay to test.
Jan 15, 2014 at 10:52 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.