1997 Ford F-150 transmission noise

1997 FORD F-150
220,000 MILES • 4.6L • V8 • 4WD • AUTOMATIC
Avatar
HAHNEC
  • MEMBER
  • 1 POST
i replaced my trans and transfer case with one of the same engine transmission and same year .but i didnt get the tourqe converter all the way in transmission and bolted it up and didnt realize it untill i went to put on the converter nuts and the flyweel wouldnt turn so i took the bellhousing bolts back out and managed to get converter all the way in put it together and it sounds like the flyweel is rubbing something while running but not by just turning engine over . any advise would be helpful thanks
Oct 24, 2014 at 3:54 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
Have you checked for evidence of something being hit? Did you fully tighten the bell housing before you noticed? Could you have cracked the flywheel?
Oct 24, 2014 at 8:41 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.