engine miss

203,000 MILES • 2WD • AUTOMATIC
Avatar
GORHAMRDG
  • MEMBER
  • 3 POSTS
1997 ford e150 4.3 code shows #2 cyl mis fire changed plug replaced wire compression ok could it be injector? if so how do u get to the injector
Jan 21, 2011 at 5:36 PM
Advertisement
Avatar
RASMATAZ
  • ✓Experienced Mechanic
  • 75,988 POSTS
REMOVAL
1.Remove the Fuel Rail.

CAUTION: The fuel injectors are deposit resistant. Do not clean the fuel injectors.

2.Remove the six fuel injectors.

1 Remove the six injector clips.
2 Remove the six fuel injectors.
3 Remove and inspect the two O-rings from each fuel injector.
- Replace the O-rings as needed.

To install, reverse the removal procedure.

NOTE: Lubricate the new O-rings with engine oil before installation.

CAUTION: Install the injector clips in the uppermost groove of the fuel injectors.


Jan 21, 2011 at 11:06 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle