I have a 97 chrysler and my fuel pump isn't working I tried everything i'm not getting power back to it but my sending unit for my fuel gauge is working. My fusses are good and so are my relays. Any ideals
Not getting power back to my fuel pump have power to my sending unit for my fuel gage which is on the same hareness. Fusses are ok and so are the relays. Any ideals
SPONSORED LINKS
Saturday, April 7th, 2012 AT 11:21 PM
3 Replies
RASMATAZ
MECHANIC
75,992 POSTS
Check fuse A and fuel pump relay
Was this
answer
helpful?
Yes
No
-1
Saturday, April 7th, 2012 AT 11:26 PM
TLONEMAN5
MEMBER
7 POSTS
The fusses are ok and so are the relays. The fuss inside the car is ok and the relays under the hood are ok. Is there a fuss i'm missing somewhere. Can someone send me a wirin g diagrham or tell me where to find one.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, April 7th, 2012 AT 11:41 PM
RASMATAZ
MECHANIC
75,992 POSTS
Check the computer control circuit of the fuel pump relay-might not be grounding the coil side of the relay also jumper 5b to 5d and see if the pump will come on-