SPONSORED LINKS

1997 Chevrolet Truck Left rear turn signal

Tiny
SYNYSTER_POPE
  • MEMBER
  • 1997 CHEVROLET TRUCK
  • 4WD
  • AUTOMATIC
My left rear turn signal does not work. All other signals work fine, though the rear left doesn't light when I turn on my hazards either. I replaced the bulbs and fuse, but there has been no change. The brake light works fine. The left indicator light blinks/clicks rapidly, while the right goes normally. Any ideas? Thank you.
SPONSORED LINKS
Wednesday, September 9th, 2015 AT 6:10 PM

3 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,708 POSTS
Check to see if there is power to the light socket. If I recall, these had a printed circuit board set up and they went bad. Let me know what you find.
Was this
answer
helpful?
Yes
No
Wednesday, September 9th, 2015 AT 6:32 PM
Tiny
SYNYSTER_POPE
  • MEMBER
  • 2 POSTS
I went and bought a tester and tried to see if there was power. I didn't get a reading on any of the sockets, even though the brake light and running light work fine. All it did was fry the fuse. Twice. Both fuses were brand new.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, September 9th, 2015 AT 9:24 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,708 POSTS
Was it frying the fuses prior to your checking it? If not, are you sure you didn't short the circuit with the tester?
Was this
answer
helpful?
Yes
No
Monday, September 14th, 2015 AT 5:53 PM

Please login or register to post a reply.

Related Turn Signal Blink Fast Content

Turn Signals Blink Fast
GUIDE
Turn Signals Blink Fast
Turn signal indicators or blinkers as they are called work in a specific manner which is dictated by the turn signal bulb and circuit resistance.
VIEW MORE

Sponsored links