The engine truns bout only hits when letting off start just aquick back fire what could this be? I have changsd the following parts[timeing chain/gears -coil -ingetion pickupcoil dist cap-wires-rotor plugs crank sensior ingnitonswitch. Still just the same. Please can you help
SPONSORED LINKS
Saturday, January 5th, 2013 AT 3:10 PM
8 Replies
ASEMASTER6371
MECHANIC
52,797 POSTS
Timing chain? Why?
Check for fuel pressure. Check spark and check compression. Lets start at basics first
Roy
Was this
answer
helpful?
Yes
No
Saturday, January 5th, 2013 AT 3:12 PM
BOBBY 97
MEMBER
6 POSTS
Thought might have jumped time but didnt help spark is good fuel is good compression good
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, January 5th, 2013 AT 3:22 PM
ASEMASTER6371
MECHANIC
52,797 POSTS
What is the fuel pressure?
Roy
Was this
answer
helpful?
Yes
No
Saturday, January 5th, 2013 AT 3:26 PM
BOBBY 97
MEMBER
6 POSTS
60at start 48 while cranking
Was this
answer
helpful?
Yes
No
Saturday, January 5th, 2013 AT 3:37 PM
ASEMASTER6371
MECHANIC
52,797 POSTS
48 cranking is too low. Needs to be 60-65
60 at start? I thought it did not run?
What motor?
Roy
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, January 5th, 2013 AT 3:41 PM
BOBBY 97
MEMBER
6 POSTS
60 at srart of pump turn on / 48 while trying to start 4.3 engine
Was this
answer
helpful?
Yes
No
Saturday, January 5th, 2013 AT 3:45 PM
BOBBY 97
MEMBER
6 POSTS
60 psi when cranking and then a loud back fire but want start and run