engine missing

155,000 MILES
Avatar
IAM2HI4U
  • MEMBER
  • 1 POST
I have a 97 s-10 pick up with a 4.3 v6. I changed the fuel pump, filter and checked pressure. The motor will start after a bit of turning over. It will idle fine, and rev up fine. But when I try to hold it at a set rpm it will not run rite. After I turn it off and let it set it will start up no problem. But still will not run rite at a set rpm.
Feb 19, 2011 at 8:07 AM
Avatar
MIKE H R
  • MEMBER
  • 3,094 POSTS
Sometimes on all engines some carbon gets up into the throttle body. This can cause the truck to not run right. The carbon can partly clog some of the air or intake holes. Try cleaning from the air cleaner to the throttle body with some cleaner. If it does not help you can do it again. If it still does not help have the truck scanned for any codes. Sometimes even though the check engine light does not come on the scanning will pinpoint the problem.
Feb 19, 2011 at 10:11 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle