1997 CHEVROLET BLAZER
100,210 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
Nice 4X4 Blazer that has been well maintained with 100K. Loud noise low in engine, banging, sounds like a rod or bearing. Still maintains oil pressure and no engine lights on. I've stopped driving it for now. Changed the oil & filter just to see if that helped.....nope!
Any thoughts on repair or just get rid of it. I'm caught on whether to just cut my losses and move or repair?
CP: Broke down in Ohio.
Jan 5, 2013 at 12:09 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
ASEMASTER6371
  • CAR REPAIR CONTRIBUTOR
  • 52,796 POSTS
i would consider a used motor. repairing it would be an open estimate and it would be expensive.

check around for a used motor and see what you feel about pricing.

whether you keep it or not is a personal choice

Roy
Jan 5, 2013 at 12:23 AM
Advertisement
Avatar
BMRFIXIT
  • CAR REPAIR CONTRIBUTOR
  • 19,053 POSTS
I would suspect a failed piston wrist pin
It’s a noise maker no effect on compression (no misfiring , no check engine)
and no loss in oil pressure

It sounds like you have a rod or main bearing that is bad. If the vehicle is in nice shape, it may be worth fixing. It may have spun a bearing.
Jan 5, 2013 at 12:28 AM