How to reconnect door lok linkage

Tiny
ANT544F
  • MEMBER
  • 1997 CHEVROLET ASTRO
  • 120,000 MILES
I removed door panel and located loose linkage but can't find where to connect it!
Sunday, March 18th, 2012 AT 11:49 PM

7 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Are we talking about the rod end?If so one end connects to the release handle lock switch door lock cylinder or the latch assembly.
Was this
answer
helpful?
Yes
No
Sunday, March 18th, 2012 AT 11:59 PM
Tiny
ANT544F
  • MEMBER
  • 4 POSTS
Yes but supposed to attach to key lock
Was this
answer
helpful?
Yes
No
Monday, March 19th, 2012 AT 12:27 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Are the key lock so did the arm that attaches to the lock cylinder fall off and into the door somewhere?
Was this
answer
helpful?
Yes
No
Monday, March 19th, 2012 AT 12:31 AM
Tiny
ANT544F
  • MEMBER
  • 4 POSTS
Yes
Was this
answer
helpful?
Yes
No
Monday, March 19th, 2012 AT 12:32 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Your just going to have to get in the door and find the arm and see why it came off.
Was this
answer
helpful?
Yes
No
Monday, March 19th, 2012 AT 12:55 AM
Tiny
ANT544F
  • MEMBER
  • 4 POSTS
Where can I find a diagram?
Was this
answer
helpful?
Yes
No
Monday, March 19th, 2012 AT 1:29 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
So you havent taken the inside door panel off yet?Your looking for instructions on how to remove the inside door panel?
Was this
answer
helpful?
Yes
No
Monday, March 19th, 2012 AT 1:35 AM

Please login or register to post a reply.

Sponsored links