1997 Buick Lesabre Stalling

229,000 MILES • 3.8L • V6 • FWD • AUTOMATIC
Avatar
BRYCER56
  • MEMBER
  • 1 POST
My car had stalled on me so I used a code reader and it said MAP sensor and tps had issues. I replaced both of the sensors. Both codes went away but now is says tps circuit low input. I don't know how to fix it. Cars rpms have been running higher than normal. When I come to a stop it doesn't idle very well and it sometimes shuts off on me. When that is happening the voltage matter mobes back and forth. A.c. on at idle makes car run worse.
Jun 27, 2015 at 11:15 AM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
First, make sure there are no vacuum leaks. Next, check to make sure the wiring to the sensors you replaced are clean and tight and free of corrosion. Next, check the idle air control valve (IAC). The IAC is responsible for maintaining the engine idle speed and increasing it when the AC is on.
Jun 27, 2015 at 2:57 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle