Rear Seat

1997 BUICK LESABRE
100,000 MILES • 6 CYL • FWD
Avatar
JSEVERO
  • MEMBER
  • 3 POSTS
i want to remove my rear seats in my 1997 buick lesabre custom. how would i go about doing this?
Jan 21, 2011 at 12:59 AM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
push in at the bottom thenlift up and pull out
Jan 21, 2011 at 2:16 AM
Avatar
JSEVERO
  • MEMBER
  • 3 POSTS
at the bottom where your back goes or the seat part?
Jan 24, 2011 at 6:09 PM
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
no at the floor to get the bottom part out then there may be a few bolts to remove for the top part of the seat, andthen lift hte top part out after removing the bolts. Some just pull out the sameway as the bottom part
Jan 24, 2011 at 7:09 PM
Avatar
JSEVERO
  • MEMBER
  • 3 POSTS
so i just pust the bottom part toward the rear and lift up? it didnt wanna seem to go when i did this
Jan 24, 2011 at 7:38 PM
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
it doesnt' go easy, but first check for bolts as they may be bolted as well. You may have to push the front part of the seat bottom down while pushing back and then up.
Jan 24, 2011 at 7:48 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.