Drivers side window is currently up but not all the way leaving a small gap at the top, looks like it is not aligned properly. When I lower the window it moves down only around 3in and then 'clunk' stops. When then moving it back up it goes straight close to the top but then shifts forward and 'clunk' again and then shift back and down leaving a 10mm gap at the top.
I have to jostle the window up and down to get the closest fit I can to a closed window.
What is it that is going wrong internally?
What replacement part/s do need to purchase before going to a garage to have it fixed as I would be ordering parts from ebay in US and delivered to me.
Appreciate any help or advice you can give!
Regards
Matt
I have to jostle the window up and down to get the closest fit I can to a closed window.
What is it that is going wrong internally?
What replacement part/s do need to purchase before going to a garage to have it fixed as I would be ordering parts from ebay in US and delivered to me.
Appreciate any help or advice you can give!
Regards
Matt
Jul 23, 2014 at 12:07 PM
