I changed my clutch and used a dab of glue to line up the pressere plate and clutch disc

2ME

MEMBER
1997 AUDI A4

I used a dab of glue to line up my clutch and pressure plate and I cant get the glue to break now and I dont want to rip the gear box again wat can I do to free it

Tuesday, November 15th, 2011 AT 9:28 PM

4 Replies

JACOBANDNICKOLAS

MECHANIC
109,716 POSTS

That is a new one. With the engine running, push the clutch in and out several times. It should come loose. I have no idea what type of glue you used, but it must be strong.

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Tuesday, November 15th, 2011 AT 9:37 PM

MHPAUTOS

MECHANIC
31,937 POSTS

Yes, a very novel approach to aligning the clutch, let the engine run up to normal temp, the heat in the flywheel and clutch may soften the glue and operating the clutch should break the bond.

Was this

answer

helpful?

Yes

No

Tuesday, November 15th, 2011 AT 9:41 PM

2ME

MEMBER
2 POSTS

I tried all dat now im not quite sure if dats wat it is see I changed my gear box and I bled my clutch and all but it wont let me put it in gear see I have a good spring bak in the peddel which shows d clutch is bled ok it just seems lyk I have no clytch at all even doh I have a good spring in the peddle and wen I push the gear stick towards 3rd or 4th it grinds even wen I dont use clutch peddle any ideas what this means

Was this

answer

helpful?

Yes

No

Wednesday, November 16th, 2011 AT 1:39 PM

JACOBANDNICKOLAS