I am having brake issues

1996 TOYOTA T-100
230,000 MILES
Avatar
JERRY SPRADLING
  • MEMBER
  • 3 POSTS
toyota t-100 brake problems, loss brakes, new calipers and pads, master cyl and bled all 4 wheels and proportional valve, still no brake, one pump and get very little pedal. could problem be in lspv left front caliper was heating up and trying to lock up on loose gravel, pulled it down to workshop and brakes were completly gone, no pedal. next morning went to pull it into shop and it had brake. pads were wore out, replaced calipers and pads, still no brake, replaced master cyl and bled system properly including lspv, still nobrake. could problem be in lspv
Nov 3, 2011 at 7:42 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
Check to make sure the rubber brake hoses are not expanding. Check to make sure nothing is leaking.
Nov 3, 2011 at 7:44 PM
Avatar
JERRY SPRADLING
  • MEMBER
  • 3 POSTS
New rubber hose on both sides, no leaks
Nov 3, 2011 at 7:54 PM
Avatar
JERRY SPRADLING
  • MEMBER
  • 3 POSTS
also has new flex hose on front and no leaks, still wonder could problem be in LSPV?
Nov 7, 2011 at 4:05 PM
Avatar
RIVERMIKERAT
  • ✓ASE Certified Mechanic
  • 6,110 POSTS
  • ASE Certified Mechanic
LSPV? Proportioning valve?
By no pedal, you mean it went all the way to the floor?
What sort of stream do you get from the bleeder screws?
Dec 31, 2011 at 4:11 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.