SPONSORED LINKS

I have a Renault Megane 1, 6e 8v Coupe.

Tiny
JO9WINTHER
  • MEMBER
  • 1996 RENAULT MEGANE
  • 85,000 MILES
It won’t start. I tried changing the crank position sensor and exchanging the ignition system from a Scenic 1, 6 8v but it doesn’t start. Could it be the immobilizer? Is it possible to reset this without a computer?
Any other ideas are welcome
SPONSORED LINKS
Tuesday, October 11th, 2011 AT 6:15 PM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
We have no information on these cars. But your immobilizer or security system could be the culprit. If you have a handbook that came with yoru car it shold tell you how to reset the system. On gm cars you turn the key on for 10 minutes or less if the security light goes out then turn it off then on then try to start the car. Also you shold have the engine scanned for codes and your fuelpressure checked. It could be either of these as well
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, October 11th, 2011 AT 7:23 PM

Please login or register to post a reply.

Related Crankshaft Sensor Replace/Remove Content

Crankshaft Sensor Symptoms
GUIDE
Crankshaft Sensor Symptoms
Most modern car engines use a crankshaft sensor to monitor the engines crankshaft rotation. This sensor sends feedback information to the cars computer which then adjusts...

Sponsored links