interior repair

1996 PONTIAC GRAND AM
60,000 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
DUNKLEYN
  • MEMBER
  • 1 POST
I need to repair the power windows on a 1996 Pontiac Grand Am. I can find repair directions for the windows but nothing on how to get the door panels off. DO you have diagrams that can help.
Apr 30, 2011 at 4:36 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
WRENCHTECH
  • CAR REPAIR CONTRIBUTOR
  • 20,761 POSTS

Remove or Disconnect

1. Manual lock rod ****.
2. Reflector using a flat blade screwdriver.
3. Door trim panel screws.
4. Door inside handle escutcheon by pulling out at bottom and disengaging top of escutcheon from door trim panel. Remove escutcheon from door inside handle.
5. Door lock switch and escutcheon.
6. Door upper trim panel.
7. Window regulator handle, if applicable.
8. Door trim panel fasteners.
9. Door trim panel hooks from door inner panel.
10. Door trim panel.

Install or Connect

1. Door trim panel.
2. Door trim panel hooks to door inner panel.
3. Door trim panel fasteners.
4. Window regulator handle, if applicable.
5. Door upper trim panel.
6. Door lock switch and escutcheon.
7. Door inside handle escutcheon.
8. Door trim panel screws.
9. Reflector using a flat blade screwdriver.
10. Manual lock rod ****.
Image (Click to enlarge)
Attached Media
Apr 30, 2011 at 6:10 PM
Advertisement