How do you suggest the best way to hold pulley still. While loosening bolt on it?
Sunday, October 4th, 2015 AT 12:17 PM
3 Replies
CAR-MAN145
MECHANIC
321 POSTS
Depends on the pulley you are trying to get off but I have found leaving the belt on and putting pressure on the belt helps
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, October 4th, 2015 AT 12:55 PM
NIGHTHAWK7441
MEMBER
2 POSTS
1996 Pontiac Bonneville se. Electrical impact didn't budge the bolt. And how do you safely suggest I do what you are proposing?
Was this
answer
helpful?
Yes
No
+1
Sunday, October 4th, 2015 AT 7:30 PM
CAR-MAN145
MECHANIC
321 POSTS
If you are trying to get the crank bolt out they are very tight and I use an air inpack gun. You can try to take the inspection cover off the transmission so you can get to the flywheel or the starter out and try to put a pry bar in the teeth of the flywheel to hold it in place and use a breaker bar on the bolt.