I whant to take out my powersteering pump out of my 1996 oldsmobile cutless supreme
Jan 22, 2011 at 9:52 AM
powersteering
GPROVENCIO
- MEMBER
- 1 POST
Hello –
Not sure if you have fixed your vehicle yet but here are the directions. Sorry no pics are available.
1. Disconnect battery ground cable.
2. Disconnect inlet and outlet hoses from pump.
3. Remove serpentine belt guard as necessary.
4. Remove belt from pulley, using 1/2 inch breaker bar.
5. Remove coolant recovery bottle as necessary.
6. Remove pump assembly.
7. Transfer pulley as necessary.
8. Reverse procedure to install, then bleed power steering system as described under Power Steering Gear , Replace.
Not sure if you have fixed your vehicle yet but here are the directions. Sorry no pics are available.
1. Disconnect battery ground cable.
2. Disconnect inlet and outlet hoses from pump.
3. Remove serpentine belt guard as necessary.
4. Remove belt from pulley, using 1/2 inch breaker bar.
5. Remove coolant recovery bottle as necessary.
6. Remove pump assembly.
7. Transfer pulley as necessary.
8. Reverse procedure to install, then bleed power steering system as described under Power Steering Gear , Replace.
Mar 16, 2011 at 6:20 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.