the car start jerking very hard whe the RPM reaching above 1500
i checked the codes and there is only 1 error showing.
p1320 inj. Signal primary.
Monday, March 11th, 2013 AT 12:29 PM
2 Replies
HMAC300
MECHANIC
48,601 POSTS
This is either a coil or ecm problem but before you do that clean teh maf and reset coputer and see if code is gone sometimes that cures it. Use choke cleaner on the maf. Otherwise this needs to be check ed by a pro an donly Nissan coils are to be used if one is bad it may be all 6 as well so be prepared for that cost. This needs a scope put on it to check coils to show which one is bad
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, March 11th, 2013 AT 2:22 PM
ADI1991
MEMBER
60 POSTS
Changed all coils
Changed all spark plugs
Checked with new maf
Reset done