I've replaced front calipers,power booster,hoses,master cylinder and brakes lock up after about 45 min of driving
Oct 18, 2012 at 7:38 AM
1996 Nissan 200sx Ve Replaced Front Calipers Power Booster Hoses Master
ANONYMOUS
- MEMBER
- 1 POST
Advertisement
You could either have contamination in the system or the master cylinder pushrod is not adjusted properly and is not entirely releasing. that will cause it to build up pressure.
If you want to find out if that is the case, wait until the next time they lock up and then loosen the hold-down bolts for the master cylinder and pull it away from the booster by 1/4 inch. If the brakes release, you found your problem.
If you want to find out if that is the case, wait until the next time they lock up and then loosen the hold-down bolts for the master cylinder and pull it away from the booster by 1/4 inch. If the brakes release, you found your problem.
Oct 18, 2012 at 7:48 AM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.