rusted shock towers

1996 MERCURY SABLE
Avatar
MKULLA14
  • MEMBER
  • 1 POST
i have a 1996 merc sable and both rear shock towers are rusted. is there a repair for this?
Jan 17, 2011 at 5:53 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
DOCHAGERTY
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 9,603 POSTS
To answer might be easier if there was a picture, can this happen?
Jan 17, 2011 at 5:55 PM
Advertisement
Avatar
FIXITMR
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 9,990 POSTS
are they busted thru yet? i dont know if anybody makes a repair kit, cant find it on internet. but you can make 1 yourself or maybe have it done? i repaired this on a ford escort for a friend with my mig welder and some sheet metal. coulda used pop rivets also.
Jan 17, 2011 at 6:05 PM
Avatar
FIXITMR
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 9,990 POSTS
a salvage yard might cut out some good 1's from a similar car and you just rivet them in?
Jan 17, 2011 at 6:07 PM
Avatar
WRENCHTECH
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 20,761 POSTS
IF this is actually repairable at all, pop rivets would not be acceptable to hold it together. This is an integral point of support for the whole body and would have to be repaired in a way that was structurally sound and in many cases is not repairable at all if too far gone already. I would get a professional to inspect it and advise you accordingly.
Jan 17, 2011 at 6:45 PM