WINDOW REMOVAL

1996 MERCURY MARQUIS

36,650 MILES • V8 • 2WD • AUTOMATIC

TMCAVOY

MEMBER
3 POSTS

I ASKED "HOW DO YOU REMOVE A REAR WINDOW IN A 96 MERCURY GRAND MARQUIS. MENTIONED THAT REGULATOR NUTS AND RIVETS HAVE BEEN REMOVED. GOT AN ANSWER FROM WRENCHTECH BUT VERY HARD TO READ AND SEE DIAGRAMS DUE TO SMALL PRINT. DON'T SEE MY ANSWER ON "REMOVING" THE WINDOW BUT EXPLAINS ON HOW TO REMOVE THE REGULATOR. REALLY WANT TO KNOW HOW TO REMOVE THE REGULATOR IN ORDER TO REPLACE IT. DONATED $5

Nov 29, 2010 at 7:30 PM

BMRFIXIT

✓ASE Certified Mechanic
19,053 POSTS

this is what i have

Rear Glass

Removal

Remove rear door trim panel (27406) and watershield.

CAUTION: Do not attempt to pry out the rivets as damage to the rear door window glass (25712) could result. Prior to removing rivet center pins, it is necessary to place a suitable block support between door outer panel and rear door window channel bracket to stabilize rear door window glass during rivet removal.

Remove Rear Door Glass run front lower retainer (25796) as outlined.

Lower rear door window glass to gain access to the two rear door window channel bracket retaining rivets and remove center pins from rivets using a drift punch. Using a 1/4-inch diameter drill, drill out the remainder of the rivets.

Remove rear door window glass.

Image (Click to enlarge)

Professional Diagram for 2CarPros Members
Click here to log in and view diagram.

Nov 30, 2010 at 2:14 AM

Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.