mercedes seat

1Pull up both release levers (2) and lift rear seat cushion (1)
2Remove rear seat cushion (1) Installation:
When reinstalling expose lap belt and belt buckles. Insert rear seat cushion into the two crash retainers at the rear and allow to catch at front. Pay attention to guide pins (4 each).
3Unscrew bolts (3) in seat belt end fitting at bottom on left and right sides and in rear backrest frame
4Lift rear backrest (4) up and remove Installation:
Before installing position insulating mat; expose guide pins for rear seat cushion.
When installing insert catches (arrows) into top of rear wall; expose rear seat belts.
5Reinstall in opposite order

Removing and installing rear seat and rear backrest - AR91.12-P-1700FA

MODEL 210.2
Removal, installation
1Unlock rear seat and tip forward
2Unlock rear seat and remove upward
3Unlock rear seat backrest and tip forward
4Remove front cover for rear floor covering AR68.20-P-4800B
5Unscrew bolt for top pivot bearing (3)
6Swing rear seat backrest back
7Unscrew seat belt end fitting for center seat belt (5) Installation: Ensure that seat belt end fitting is properly positioned

8Unscrew bolt for bottom pivot bearing (4)
9Remove rear seat backrest on left (1) and right (2) upward
10Reinstall in opposite order
11Adjust rear seat backrest