1996 Isuzu Rodeo engine performance

177,000 MILES • 3.2L • V6 • 4WD • MANUAL
Avatar
ACETECH
  • MEMBER
  • 1 POST
engine cranks but does not start have voltage to crank sensor and cam sensor, i have voltage to icm but nohing comonig out replaced icm still no change can comuncate with scanner no codes present ,seems injector curciut is not working good fuel pressureat 45psi. have any ideas thanks.....
Feb 13, 2014 at 7:35 AM
Advertisement
Avatar
SINBAD271
  • ✓Experienced Mechanic
  • 169 POSTS
Test the crank sensor its self . Test it for high resistance .. Have you checked for fire ? You may be getting
voltage to crank sensor but is the sensor sending a signal to pcm ?
Aug 26, 2019 at 12:07 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle

Advertisement