1996 Infiniti G20 Replace Front Strut Shocks Separate Casing

1996 INFINITI G20
157,000 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
I need to replace the front strut/shocks. I don't know how to separate it from the casing.
Dec 18, 2012 at 3:23 AM
Advertisement
Avatar
ASEMASTER6371
  • ✓ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic

Raise and support vehicle, then remove upper strut securing nuts. Do not remove center piston rod lock nut.
Remove lower strut mounting nut.
Remove strut assembly from vehicle and place in a suitable vise.
Using spring compressor tool No. HT71780000 or equivalent, compress spring so strut mounting insulator can be turned by hand.
Remove top piston rod lock nut and separate spring from strut assembly.
Reverse procedure to install. Tighten to specifications and check wheel alignment.
Dec 18, 2012 at 3:54 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.