1996 Honda Prelude Been Having New Clutch System Yesterday Dropped Down

1996 HONDA PRELUDE
230,000 MILES
Avatar
MATTMYCKO
  • MEMBER
  • 1 POST
I have been having an issue with my new clutch system. Yesterday, the clutch dropped down to the point where it let out at the bottom. I know most clutch are suppose to let out at the top. I had the service done with Midas. So now my clutch is completely to the floor without any pressure at all! I will not regain pressure when I bleed the system. I have tired to pump it and bleed it and I have tired the hose method as well. MC, Slave drive and the clutch system have been replaced. Any other suggestions that might would fix this pending issue? Thank in Advance!
Nov 4, 2012 at 5:27 PM
Advertisement
Avatar
ASEMASTER6371
  • ✓ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
air in the system is tough to get out.

open the bleeder and let the fluid flow till you have no air. keep the master full.

then adjust the clutch

Roy
Nov 4, 2012 at 5:42 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.