Monday, December 10th, 2012 AT 12:04 AM
JVREPAIR
- MEMBER
- 1996 HONDA CIVIC
- 120,455 MILES
Torque head specification
Torque head specification
1 Reply
ASEMASTER6371
- MECHANIC
- 52,797 POSTS
Tighten the cylinder head bolts sequentially in four steps:
1st step 20 Nm (2.0 kgf-m, 14 lb ft)
2nd step 49 Nm (5.0 kgf-m, 36 lb ft)
3rd step 67 Nm (6.8 kgf-m, 49 lb ft)
4th step 67 Nm (6.8 Kgf-m, 49 lb ft)
make sure you use new head bolts
Roy
1st step 20 Nm (2.0 kgf-m, 14 lb ft)
2nd step 49 Nm (5.0 kgf-m, 36 lb ft)
3rd step 67 Nm (6.8 kgf-m, 49 lb ft)
4th step 67 Nm (6.8 Kgf-m, 49 lb ft)
make sure you use new head bolts
Roy
SPONSORED LINKS
Was this helpful?
Yes
No
Monday, December 10th, 2012 AT 12:13 AM
